ESAB · TIG Welding (GTAW)
The ESAB Renegade ET 350iPA is a 350 A inverter-based HF TIG and MMA welding machine weighing 16.3 kg, delivering 350 A at 24.0 V on a 60% duty cycle from a 400 V three-phase supply, with a TFT panel, engineered welding curves for cellulosic and rutile/basic electrodes, and MMA Pulse.
Price on request. POFIS is an ESAB Authorized Distributor & Service Centre in Abu Dhabi — quotations include confirmed lead time and delivery terms.
Where it is used
Features
Separate welding curves for cellulosic and for rutile/basic electrodes. These electrode families behave very differently — cellulosics need a high, fast-responding arc voltage for pipeline root runs, basics a softer one — and a machine with a curve for each is doing work the welder would otherwise do by compensating.
Pulsing applied to stick welding, for heat input control on thin material and out-of-position work. Combined with the cellulosic curve, that covers both ends of pipe welding on one machine.
ESAB claim the best power-to-weight ratio in its class, and the figures support it: 350 A at 24.0 V at 60% and 271 A at 100% in TIG, from a machine weighing 16.3 kg without the cooler. The rugged composite casing is built for tough environments.
An easy-to-read, quick-to-set TFT panel with memory settings available for each welding process, so switching between TIG and stick does not mean re-entering parameters.
A trigger function switching between two output current levels, giving control over heat input and weld pool size without stopping — the standard way to manage a thinning edge or a changing joint.
Open circuit voltage is 62 V, dropping to 15 V with VRD active. That is lower than most machines achieve and matters on confined-space and wet work where application class S applies.
Tool-less connection to the EC 1001 water cooler and trolley. With the cooler fitted the combination weighs 26.3 kg.
Technical data
Published manufacturer specifications. Where a figure affects your welding procedure, confirm it against the instruction manual for your specific configuration.
| Primary voltage, 3 ph | 400 VAC ±15%, 50/60 Hz |
|---|---|
| Fuse, slow | 16 A at 400 V |
| Idle power consumption | 40 W |
| Power factor at max current | 0.83 |
| Efficiency at max current, TIG / MMA | 91% |
| Open circuit voltage, with / without VRD | 15 V / 62 V |
| Mains cable | 3 m, 4 × 4 mm² |
| Maximum output | 350 A |
|---|---|
| TIG welding output | 350 A / 24.0 V at 60% duty cycle; 271 A / 20.8 V at 100% |
| MMA welding output | 300 A / 32.0 V at 60% duty cycle; 192 A / 27.7 V at 100% |
| Current range | 5–350 A |
| Dimensions (L × W × H) | 460 × 200 × 320 mm |
|---|---|
| Weight, without / with cooler | 16.3 kg / 26.3 kg |
| Approvals / application class / protection class | CE or non-CE / S / IP23S |
Ordering information
Quote these part numbers on your enquiry or LPO to guarantee the exact configuration. If you are unsure which variant suits your application, send us the joint details and we will specify it.
| Description | Part number |
|---|---|
| Renegade ET 350iPA, CE, incl. 3 m mains cable, CEE 16 A plug and gas hose | 0700402403 |
| Renegade ET 350iPA, non-CE, incl. 3 m mains cable | 0700402401 |
| Description | Part number |
|---|---|
| TXH 201F HD torch, gas-cooled, OKC 50, 2-pin, 4 m | 0700300899 |
| TXH 201F HD torch, gas-cooled, OKC 50, 2-pin, 8 m | 0700300707 |
| Exeor TIG XCT 400W torch, liquid-cooled, OKC 50, 2-pin, 4 m | 0700026334 |
| Exeor TIG XCT 400W torch, liquid-cooled, OKC 50, 2-pin, 8 m | 0700026335 |
| Exeor TIG SR X26-R torch, gas-cooled with remote control, OKC 50, 8-pin, 4 m | 0700026254 |
| Description | Part number |
|---|---|
| Shoulder strap | 0445197880 |
| EC 1001 water cooler | 0445045881 |
| MMA 4 hand remote current control, 10 m (33 ft) cable, 8-pin | 0700500084 |
| 10 m replacement cable for MMA 4 remote | 0445204880 |
| 25 m replacement cable for MMA 4 remote | 0445204881 |
| TIG foot control, 4.5 m (15 ft) cable and 8-pin connector | W4014450 |
| Trolley, 2-wheel, for Renegade | 0460330881 |
Downloads
Need the instruction manual or spare parts list for this machine? Request it from weldiv@pofis.ae and we will send the current revision.
Frequently asked
350 A at 24.0 V on a 60% duty cycle in TIG, and 271 A at 20.8 V continuously at 100%. In MMA it gives 300 A at 32.0 V at 60% and 192 A at 100%. Current range is 5–350 A.
Yes — it has an engineered welding curve specifically for cellulosic electrodes, and a separate one for rutile and basic. Cellulosics need a high, fast-responding arc voltage for pipeline root runs, and a dedicated curve removes the compensation the welder would otherwise have to make.
The 350iPA is 350 A at 60% duty cycle on a fixed 400 V three-phase supply, with a TFT panel, cellulosic and basic electrode curves and MMA Pulse. The ET 300i is 300 A with an auto-sensing 208–528 V input (including single phase) and a +55 °C ambient rating. Choose the 350iPA for output and electrode curves, the 300i for supply flexibility and extreme ambient heat.
15 V with VRD active, against 62 V without. That is a notably low VRD figure and matters for confined-space and wet work where application class S conditions apply.
ESAB list nuclear applications among its industries. Whether it meets your specific project specification is a question for your client and the governing procedure — ask us and we will supply whatever documentation ESAB can provide.
Only for water-cooled torches such as the Exeor TIG XCT 400W. The EC 1001 water cooler (0445045881) connects tool-lessly and takes the combined weight to 26.3 kg. Gas-cooled TXH 201F torches are available if a cooler is not wanted.
POFIS is an ESAB Authorized Distributor and Service Centre in Abu Dhabi. Request a quotation on this page or email weldiv@pofis.ae for price, CE variant confirmation and lead time.
Procurement & supply
The ESAB Renegade ET 350iPA is supplied from Abu Dhabi by Perfect Oilfield & Industrial Supply LLC as an ESAB Authorized Distributor and Service Centre. The information below covers what procurement and QA/QC departments normally need before raising a purchase order.
Stock items dispatch from Abu Dhabi within 24–48 hours. Indent items are quoted with a confirmed lead time at the time of offer.
POFIS is an approved ADNOC vendor and is listed on the approved vendor lists (AVL) of major operators and EPC contractors across the GCC. We can complete supplier registration and prequalification documentation on request.
Standard credit terms are available to registered corporate accounts. LPO, LC and advance payment are all accepted.
Delivery across the UAE and the wider GCC. Quotations can be issued on EXW, FOB, CIF or DDP terms to suit your project.
Full manufacturer warranty, honoured locally. As an ESAB Authorized Service Centre we carry out warranty work and repairs in Abu Dhabi rather than returning equipment abroad.
In-UAE service, commissioning, operator training and spare parts backing for every machine we supply.
Price on request
Send the form and the POFIS welding division replies with pricing, confirmed lead time, delivery terms and availability. Tell us who you are and what the job is, so the reply can be specific to it rather than a catalogue price list.
