ESAB · Plasma Cutting
The ESAB Cutmaster 50+ is a portable 50 A air plasma cutting package with a 25 mm cut capacity, 16 mm pierce capacity and 32 mm maximum severance, running on 400 V three-phase power at a 60% duty cycle at 50 A, supplied with the SL60 1Torch and a 10.9 cm TFT LCD display.
Price on request. POFIS is an ESAB Authorized Distributor & Service Centre in Abu Dhabi — quotations include confirmed lead time and delivery terms.
Where it is used
Features
A bright 10.9 cm (4.3 in) TFT LCD display with a glove-friendly adjustment knob. A plasma operator is wearing gauntlets and a face shield; a control that cannot be used without removing either is a control that gets set once and left.
Switchable between normal and grate cutting. Grate mode keeps the arc alive across the gaps in mesh and expanded metal instead of extinguishing at every strand, which is what makes cutting grating practical rather than infuriating.
Supplied with the industrial SL60 1Torch, which has 2T/4T function, a safety trigger lock and a double-tap trigger that conserves bottled air. The torch itself is rated 100% duty cycle at 60 A with 165 l/min air flow.
Air continues to flow briefly after the cut, cooling the consumables and expanding their life. Consumable cost is the dominant running cost on a plasma system, so anything that extends tip and electrode life pays back continuously.
Cutmaster Black Series consumables are included, which ESAB state give up to 60% longer life than standard parts.
A pre-installed 14-pin CPC receptacle and voltage divider provide Start/Stop, OK-to-Move and divided arc voltage at ratios of 20:1, 30:1, 40:1, 50:1 and 80:1. The machine can therefore go onto a CNC table later without a retrofit.
An industry-leading 3-year warranty on the power supply and 1 year on torch and leads.
Three handles, a lightweight industrial all-weather housing, IP23S rating and 16 kg in a 465 × 200 × 315 mm case. Operating range is −10 °C to +50 °C.
Technical data
Published manufacturer specifications. Where a figure affects your welding procedure, confirm it against the instruction manual for your specific configuration.
| Amperage output | 15–50 A, continuously adjustable |
|---|---|
| Pierce capacity | 16 mm |
| Cut capacity | 25 mm |
| Maximum severance | 32 mm (depending on material) |
| Rated duty cycle at 40 °C | 60% at 50 A with cutting voltage 150 V |
| SL60 torch duty cycle | 100% at 60 A with 165 l/min (350 scfh) air flow |
| Input voltage | 400 VAC ±10%, 50/60 Hz, 3-phase |
|---|---|
| Amperage draw at maximum cut capacity | 15.5 A |
| Recommended circuit breaker size | 16 A |
| Recommended generator size | 12 kW or higher |
| Input power cable | 3 m, 12 AWG 4/C or 2.5 mm², without plug |
| Work lead with ground clamp | 3 m, 10 mm² work cable with 25 mm² connection |
| Gas requirement | Compressed air |
|---|---|
| Compressed air pressure | 6.2–8.6 bar (90–125 psi / 0.62–0.86 MPa) |
| Compressed air flow | 142–235 l/min (300–500 scfh) |
| Dimensions (L × W × H) | 465 × 200 × 315 mm |
|---|---|
| Weight | 16 kg |
| Operating temperature | −10 °C to +50 °C |
| Enclosure class | IP23S |
| Certifications | CE, UKCA |
| Warranty | 3 years on power supply; 1 year on torch and leads |
Ordering information
Quote these part numbers on your enquiry or LPO to guarantee the exact configuration. If you are unsure which variant suits your application, send us the joint details and we will specify it.
| Description | Part number |
|---|---|
| ESAB Cutmaster 50+ package, 400 V 3 ph, CE/UKCA Includes Cutmaster 50+ power supply, SL60 75° torch and 5 m lead, 3 m work lead with ground clamp, consumables kit and regional 1/4″ air fitting. | 0559150004 |
| Description | Part number |
|---|---|
| SL60 1Torch and lead, 6.1 m (20 ft), 75° head | 7-5204 |
| SL60 1Torch and lead, 15.2 m (50 ft), 75° head | 7-5205 |
| Description | Part number | Output | Pierce | Cut | Duty cycle |
|---|---|---|---|---|---|
| Cutmaster 50+ | 0559150004 | 15–50 A | 16 mm | 25 mm | 60% @ 50 A |
| Cutmaster 70+ | 0559170004 | 15–70 A | 20 mm | 30 mm | 50% @ 70 A |
| Cutmaster 120 | 0559119304 | 120 A | 25 mm | 40 mm | 40% @ 120 A |
| Description | Part number |
|---|---|
| Cutting guide kit | 7-7501 |
| Circle cutting guide kit | 7-3291 |
| Straight line cutting guide | 7-8911 |
| Yellow leather lead cover, 7.6 m (25 ft) | 0700009088 |
| Black leather lead cover, 7.6 m (25 ft) | 0700009089 |
| Multi-purpose cart | 7-8888 |
| Single stage air filter kit | 7-7507 |
| Two stage air filter kit | 9-9387 |
Downloads
Need the instruction manual or spare parts list for this machine? Request it from weldiv@pofis.ae and we will send the current revision.
Frequently asked
25 mm cut capacity, with 16 mm pierce capacity and 32 mm maximum severance depending on material. The cut capacity is the figure to plan production around; pierce capacity governs whether a cut can be started in the plate rather than from an edge.
Cut capacity is the thickness the machine will cut cleanly at a sensible speed from an edge. Pierce capacity is the thickness it can start a hole in from the middle of the plate, and it is always lower — 16 mm against 25 mm here. If your work starts cuts in the middle of plate, pierce capacity is the number that matters.
6.2 to 8.6 bar (90–125 psi) at 142 to 235 l/min (300–500 scfh) of compressed air. A single or two stage air filter is strongly recommended — clean, dry air is the dominant factor in consumable life, particularly in a humid coastal climate.
Yes. It ships with a pre-installed 14-pin CPC receptacle and voltage divider providing Start/Stop, OK-to-Move and divided arc voltage at 20:1, 30:1, 40:1, 50:1 and 80:1 ratios. No retrofit is needed to move it onto a table later.
Yes — ESAB recommend a generator of 12 kW or higher. Amperage draw at maximum cut capacity is 15.5 A, with a recommended 16 A circuit breaker. The lower draw makes it the easier of the two to run on site power.
The 50+ cuts 25 mm with a 16 mm pierce at 60% duty cycle; the 70+ cuts 30 mm with a 20 mm pierce at 50%. Same chassis, same 16 kg, same SL60 torch and same accessories. Choose by the thickness you actually cut — and note the 50+ has the higher duty cycle and needs only a 12 kW generator against 20 kW.
A mode that keeps the arc established across the gaps in mesh and expanded metal, rather than extinguishing each time the torch crosses a void. Without it, cutting grating means re-triggering constantly.
POFIS is an ESAB Authorized Distributor and Service Centre in Abu Dhabi. Request a quotation on this page or email weldiv@pofis.ae for price, consumable packages and lead time.
Procurement & supply
The ESAB Cutmaster 50+ is supplied from Abu Dhabi by Perfect Oilfield & Industrial Supply LLC as an ESAB Authorized Distributor and Service Centre. The information below covers what procurement and QA/QC departments normally need before raising a purchase order.
Stock items dispatch from Abu Dhabi within 24–48 hours. Indent items are quoted with a confirmed lead time at the time of offer.
POFIS is an approved ADNOC vendor and is listed on the approved vendor lists (AVL) of major operators and EPC contractors across the GCC. We can complete supplier registration and prequalification documentation on request.
Standard credit terms are available to registered corporate accounts. LPO, LC and advance payment are all accepted.
Delivery across the UAE and the wider GCC. Quotations can be issued on EXW, FOB, CIF or DDP terms to suit your project.
Full manufacturer warranty, honoured locally. As an ESAB Authorized Service Centre we carry out warranty work and repairs in Abu Dhabi rather than returning equipment abroad.
In-UAE service, commissioning, operator training and spare parts backing for every machine we supply.
Price on request
Send the form and the POFIS welding division replies with pricing, confirmed lead time, delivery terms and availability. Tell us who you are and what the job is, so the reply can be specific to it rather than a catalogue price list.
